TopSecretBoats.com - Master Price List Hardware

1 2 3 4 5 6 Next

Sport hydro and ThunderBoats Package

Price:

$255.21

Top Secret Boats has put a package together :
( Sport Hydro and ThunderBoats )
Plus shipping

Kit for Cat 40 Inch to 65 inch

Price:

$209.00

This Complete Cat Kit Is Used By Racers Around The World Is Made For Gas Boats 40" And Up To 65" Long .

Made To Fit 1/4 Prop Shaft. Made Of 6061 Alum.

C.n.c Machined By Top Secret Boats Insures Top Accurate Precision Parts

complete kit for mono.

Price:

$270.00

This Complete Mono Kit Is Used By Racers Around The World Is Made For Gas Boats 40" And Up To 65" Long .

Made To Fit 1/4 Prop Shaft. Made Of 6061 Alum.

C.n.c Machined By Top Secret Boats Insures Top Accurate Precision Parts

Note : Prop And Shaft, 5/16 Stuffing Tube, Drive Dog, Motor With Pipe ,and Hall Are Not Included.!!!!

Intake manifold for Zenoah 230-260-RC260

Price:

$29.00

After extensive R&D Top Secret Boats has designed our own Gain in horsepower and torque with the new Gas intake manifold Or (Isolator Block Kit) for your Modified or stock Zenoah 260. No More cracked or warped manifolds to be concerned with.

replacement Teflon gasket set

Price:

$12.50

set of two replacement gaskets for Top Secret Boats carb. block.

Needle lock for 257 carburetor

Price:

$7.95

one Ounce can lead to hours of reliable Racing and Fun.

5" T-Bar for 5/16 stuffing tube

Reg. Price:

~~$29.99~~

Sale Price:

$25.00

Save:

$4.99

Check out Top Secret Boats New T-Bar with Grease fitting built right in.
Now greasing the flex shaft is as easy as putting gas in. Made to fit 5/16 stuffing tube.

Available in natural only. No Blue anodized T-Bars available at this time.

Dual exstended 6"rudder kit

Price:

$130.00

THIS TWIN RUDDER KIT IS MADE FOR GAS And Nitro BOATS .

EACH BLADE HAS ONE WATER PICKUP.

STEERING ARM CAN BE MOUNTED ON LEFT OR RIGHT SIDE OF EITHER BLADE.

The leading edge of the rudder blade is 5 1/2 In. from back of boat.

C.N.C MACHINED BY TOP SECRET BOATS INSURES TOP ACCURATE PRECISION PARTS.

Dual 5" Rudder Kit

Reg. Price:

~~$120.00~~

Sale Price:

$115.00

Save:

$5.00

THIS TWIN RUDDER KIT IS MADE FOR GAS And Nitro BOATS .

EACH BLADE HAS ONE WATER PICKUP.

STEERING ARM CAN BE MOUNTED ON LEFT OR RIGHT SIDE OF EITHER BLADE.

The leading edge of the rudder blade is 3 1/2 In. from back of boat.

C.N.C MACHINED BY TOP SECRET BOATS INSURES TOP ACCURATE PRECISION PARTS.

Dual Rudder 4"kit

Price:

$112.00

THIS TWIN RUDDER KIT IS MADE FOR GAS and nitro BOATS 40" TO 65" LONG.

EACH BLADE HAS ONE WATER PICKUP.

STEERING ARM CAN BE MOUNTED ON LEFT OR RIGHT SIDE OF EITHER BLADE.

The TRAILING edge of the rudder blade is 4" from back of boat.

C.N.C MACHINED BY TOP SECRET BOATS INSURES TOP ACCURATE PRECISION PARTS.

If shipping to Italy or Malta it will be sipped USPS Express mail Only At $29.00 and we do combine shipping.

Rudder with 2 Water Pick-ups - KIT (4")

Reg. Price:

~~$48.80~~

Sale Price:

$45.00

Save:

$3.80

This pre-assembled hardware kit is made from aircraft quality aluminum. It comes standard in a natural finish.

This KIT is widely used on Mono, Crackerbox, Cat and Sport Hydro Hulls and extends out 4" from the transom to the trailing edge of the rudder. The 2 oversized water intakes can be used to cool the engine and the exhaust system simultaneously. Additional feature incorporates a breakaway rudder system.

Rudder with 2 Water Pick-ups - KIT (5")

Reg. Price:

~~$49.99~~

Sale Price:

$45.00

Save:

$4.99

This pre-assembled hardware kit is made from aircraft quality aluminum. It comes standard in a natural finish.

This KIT is widely used on Mono, Cat and Sport Hydro Hulls and extends out 5" from the transom to the trailing edge of the rudder. The 2 oversized water intakes can be used to cool the engine and the exhaust system simultaneously. Additional feature incorporates a breakaway rudder system.

Rudder with 2 Water Pick-ups - KIT (6-3/4")

Price:

$58.00

This pre-assembled hardware kit is made from aircraft quality aluminum. It comes standard in a natural finish.

This KIT is designed for use with our "Stinger Drive" and is widely used on Mono Hulls. It extends out 6-3/4" from the transom to the trailing edge of the rudder. The 2 oversized water intakes can be used to cool the engine and the exhaust system simultaneously. Additional feature incorporates a breakaway rudder system.

Note this comes in natural finish only. (no anodizing available)

Stinger Drive

Reg. Price:

~~$52.00~~

Sale Price:

$45.00

Save:

$7.00

This pre-assembled drive unit is made from 6061-T6 aircraft quality aluminum. It comes standard in a natural finish.

This drive is designed for MONO and Crackerbox hulls, it features a 6 degree adjustable tilt and the "Stinger" can be adjusted in or out up to 3/4".

Replacement stinger barrel

Price:

$10.00

1 2 3 4 5 6 Next